Jiushark JF13K Diamond Mini
Type
CPU CoolerPrice
$30.00Today's review will cover a rather unique CPU cooler from Jiushark, a relatively new player to the cooling market from China. This CPU cooler, the JF13K mini DIAMOND, offers top down cooling which not only cools your CPU - but also your RAM, VRMs, and SSD (if it is installed next to the CPU)!
As this is a top down cooler, my expectations for this cooler aren't as high as traditional CPU coolers I test. However, with a full six heatpipes and a wide heatsink I hoped the JF13K mini DIAMOND could at least offer performance comparable to traditional low end air coolers for standard desktops. Can it? Lets take a look at the features and installation, then we'll go over the benchmarks to tell you how well this cooler performs.

Pros
- Innovative design
- Cools VRMs and RAM
- Low Height
- Easy to install
Cons
- Less effective than traditional CPU coolers
- Limited SFF case compatibility (won't fit in cases like SUGO 14, but it will do fine in others)
Features of Juishark's JF13K Mini DIAMOND
- Six Copper Heatpipes

The JF13K mini DIAMOND comes with 6 copper heat pipes, similar to many mid-range air coolers.
- Low Height

The unique CPU cooler's total height is roughly 10cm/4" tall, which means it can be installed in slim cases that otherwise would be limited to less capable SFF coolers.

- 2x 100mm fans
The fans included can be just as important as the radiator and heatpipes of a cooler. Jiushark includes 2x 100mm fans. This size decision means that if you're considering using an alternative fan, your choices will be limited as it is not a commonly produced fan size.

- Small tube of thermal paste
Included is a small tube of thermal paste suitable for one or two applications.
- Compatible with tall RAM
Despite overhanging a motherboard's DIMM slots, this unique CPU cooler is compatible with tall RAM like the GSkill TridentZ RGB shown in this picture. RAM is installed in the "wrong" slots to show that the cooler would be compatible even if all 4 DIMMS are filled.

- Neatly organized accessories box
While this isn't something that would change my purchasing recommendations, a "nice to have" that Jiushark has is a neatly organized plastic container for all of the mounting accessories and the included thermal paste.

Test Platform Configuration and Testing Methodology
I've tested with Intel's i7-13700K to show how this cooler performs. The system system is tested with a full strength workload, two reduced wattage loads, and at noise normalized settings.
Observant readers may notice that the noise graphs start at 35 instead of zero. This is because my sound meter cannot measure sound levels lower than 35 dBA. This makes it the "zero" for testing purposes. For those concerned that this might distort results - there's no worry. If anything, the graphs above will minimize the differences in noise levels because dBA measurements are logarithmic. For a detailed explanation of how decibel measurements correspond to perceived noise levels, please check out the video below from BeQuiet! which makes it easy to visualize and understand the true impact of of increasing dBA levels.
Intel LGA 1700 Installation
The installation of Jiushark's JF13K Mini Diamond is straightforward and easy, although it is slightly easier to install on an AMD AM4/AM5 platform.
- Assemble the backplate and place it against the rear of your motherboard

- Secure the backplate using the included standoffs

- Place the mounting bars on top of the standoffs, secure them with the included screws

- Next, place the heatsink on top of the mounting bars.
- Technically, you're advised to remove the fans for installation - but I've found you can install the unit with the fans installed if you are careful.

- The final step is to connect the unit's PWM cord to your motherboard, and power it on!
It is important to note that for the cooler's best performance, it needs to be installed in the orientation shown below. If the cooler's orientation is flipped, it will not perform as well.

Intel i7-13700K Cooling and Acoustic Results
Maximum Cooling Power
Most coolers reach TJ Max, the maximum temperature of the CPU of 100 degrees Celsius, when power limits are removed with Intel's i7-13700K. This is especially true when we're talking about smaller coolers like the JF13K Diamond Mini.
With a result of 201W over the course of testing, the JF13K Diamond Mini isn't winning any overclocking competitions - but it isn't designed to. The fact that it's performing within batting range of traditional coolers like Scythe's Kotetsu Mark Three or Thermalright's Silver Soul 135 is a strong accomplishment for a top down cooler.

Maximum Noise Levels
Performance is only one part of the picture, noise levels are equally important. At 45.6 dBA, this unique CPU cooler's maximum noise levels are right in the middle of the other products I have tested.

If you're particular about noise levels, our next results will show you how it performs when it runs quietly.
Noise Normalized Performance
For noise normalized testing, I've set the fans to a low 38.2 dBA. This is a slightly audible noise level, but won't bother most users. The results here were stronger than expected, as I didn't anticipate this cooler would outperform any of the units I've tested - but it did, outperforming both Cougar's Forza 135 (by a hair) and Thermalright's Silver Soul 135 (by a significant margin) when the fans were set to run quietly!

175W Results
While maximum performance is important, most of the time you won't be pushing the CPU to its limits. It's good to see how a cooler performs in more typical situations, and most users won't use more than 175W in common usage.

I wasn't expecting very strong thermal results from the Mini due to the unique CPU cooler's top-down design. However, it was only a single degree away from the performance of Thermalright's Silver Soul 135. As the 175W load pushed the cooler near its limits, it ran just as loudly as a full intensity workload at 45.6 dBA.

125W Results
125W is the lowest level of power I test, and it's similar to what users will consume with this CPU in demanding games. While I've tested and show thermal results, they're really not a concern because even Intel's stock cooler will keep the CPU cool enough in a workload like this.

Noise levels, that's what matters in low intensity workload like this. At 41.4 dBA, Juishark's JF13K Diamond Mini doesn't run loudly per se - but it does run louder than most coolers in this scenario.

Conclusion
Jiushark's JF13K Diamond Mini is an innovative and unique CPU cooler which offers top down cooling that also cools your RAM and VRMs. Its low profile might make it especially useful for builds which otherwise would have been restricted to smaller SFF coolers. The MINI isn't currently available on Amazon, so you'll have to buy it from sites like AliExpress if you're interested in it.

Unique top down cooler which also cools VRMs and RAM
- Low Height
- Cools VRMs and RAM
- Strong performance for a top down design
Pros
- Limited SFF compatibility